The CNC Automatic Painting Machine supports multi-layer spraying. The CNC system can preset the spraying parameters for each layer, such as spraying angle, spray volume, and spraying time. After the first layer is sprayed, the system automatically waits for the coating to dry or cure and prepares for the next layer.

Based on industry experience and standard equipment parameters, the single-pass coating thickness of a reciprocating automatic painting machine under standard operating conditions is typically between: 20μm and 60μm (i.e., 0.02 to 0.06mm).

Reciprocating automatic spraying machines are generally suitable for painting flat parts or lightly three-dimensional structural parts. Cabinet doors, as one of the main targets of spraying, are typical flat workpieces, but often feature complex details such as cutouts, decorative borders, and shadow lines.

If a standard CNC automatic painting machine is used with an HVLP spray gun, and the spraying process parameters are set reasonably, an average loss rate between 15% and 25% is within the normal range. If combined with a paint recovery system or electrostatic spraying system, the loss can potentially be reduced to around 10%.

The answer is yes: automatic painting machines must undergo regular maintenance. As precision equipment integrating electronic control, mechanical transmission, pneumatic systems, fluid delivery, and spray control, a CNC automatic painting machine relies on the coordinated operation of multiple key components.

Based on industrial experience, common CNC automatic painting machine spray pressures are as follows: 1. Atomizing air pressure: 1.5–3.0 bar 2. Paint fluid pressure: 0.5–1.5 bar 3. Fan-shaped air pressure: 0.5–1.2 bar

The professional answer is: This type of equipment is generally referred to as an automatic spraying machine or automatic painting machine. Depending on the furniture material and product characteristics, it is often specifically referred to as an automatic wood painting machine.

Based on current market pricing, the price of a CNC automatic painting machine typically ranges from $20,000 to $60,000. This price fluctuation is determined by multiple factors and cannot be simply measured by a single parameter.

Precautions when using a CNC automatic painting machine: First: Operational Taboos 1. Do not skip the pre-startup self-test 2. Do not manually intervene in the running spray gun or slide system 3. Do not start the machine without setting the spray parameters Second: Spray Material Taboos 1. Do not use unfiltered paint 2. Do not mix different types of paint or solvents Third: Maintenance Taboos 1. Do not neglect routine cleaning of the nozzle and paint pump 2. Do not leave the nozzle unsealed during extended downtime Fourth: Safety Operation Taboos 1. Do not operate in poorly ventilated environments 2. Do not modify CNC programs by non-professionals Fifth: Management System Taboos 1. Do not operate the machine without maintenance records 2. Do not operate the machine without operator training

Under the same production volume and process requirements, an automatic painting machine typically uses 20%-40% more paint than a roller coating machine. If your business's goal is to reduce paint usage, control coating costs, and minimize emissions, then, provided the workpiece is suitable, a roller coating machine is undoubtedly the more energy-efficient and efficient choice.